Are you trying to make sure that you know how to enter the Xiaomi Redmi Note 11 Test Pointg or enter the EDL mode? Well, the thing is that some of the Xiaomi device or Poco does not enter the EDL mode using the USB cable. This depends on your device version.
You should know that entering the EDL Test Point or mode can help resolve some common issues such as bricking, pattern lock loss, or Google account verification failure after a hard reset. So the Xiaomi, Redmi, Poco, and other model uses the EDL (Emergency Download) points, also known as test points which are physical point on the device’s motherboard that, when shorted or connected, forces the smartphone to reboot into EDL mode (Emergency Download Mode).
This mode then allow you to flash firmware, unbrick a device, or bypass security features like FRP (Factory Reset Protection) when standard methods fail. To access the Test Point, however, you will have to disassemble the phone to access the Test Point Pinout. To do this, you will have to remove the device’s back cover, disconnect the battery, and then remove other components to reveal the motherboard.
Please note that dissembling your phone risks damaging the device and this may void the warranty, so be careful when doing it or you can take it to a good technician to help you out.
When trying to locate the Test Point on your Redmi Note 11, make sure you look at the diagram or picture of what your device Test Point looks like as this may vary from another model. That being said, let’s look at what Test Point is all about.
What is the Xiaomi Redmi Note 11 Test Point or EDL Mode
The Xiaomi Redmi Note 11 Test Point or EDL mode also known as an emergency mode for mobile is what you need to boot your device to in order to flash your phone. Well, all Samsung phones do not come with EDL or Test Point. To flash your Xiaomi Redmi Note 11, you will need to boot the device into EDL or emergency downloading mode and flash fastboot rom /firmware using the Mi Flash tool. This will help to fix your device if it is dead.
How to Boot Xiaomi Redmi Note 11 into EDL Mode (Test Point) PINOUT
To enter your Xiaomi Redmi Note 11 into EDL mode or Test Point, follow the steps below.
Step 1: Connect your device with a modified USB cable.
Step 2: Switch off your phone.
Step 3: Press and hold the Volume Up & Down buttons together,..
Step 4: Connect the device to the PC using the modified cable.
OR
This method involved dissembling the back panel and locating the Test Point which is available on the right side. Then after that, you can boot your Redmi Note 11 into EDL Mode. Then connect the device to your Windows PC and open the device manager to check for that. It should show something like this Qualcomm HS-USB QDLoader 9008 or QHUSB_BULK.
How to Find EDL Mode For Xiaomi Redmi Note 11
Step 1: Turn Off your phone.
Step 2: Open the back cover of the dead Xiaomi Redmi Note 11.
Step 3: After removing the back cover, disconnect the battery connector first. Battery not required for EDL mode.
Step 4: You can then make a jumper to the visible edl points.
Step 5: Done. You have the Xiaomi Redmi Note 11 Test Point or EDL mode in front of you.
Other Ways to Enter EDL Mode on Xiaomi Redmi Note 11
If you still can’t enter the EDL mode or Test Point on your Xiaomi Redmi Note 11, follow the methods below to do that on your phone.
By Using Hardware Test Points
Step 1: Turn off your device if possible.
Step 2: Open the back cover of your phone.
Step 3: Short the 2 test points on your device’s mainboard.
Step 4: Next, plug the USB into your PC.
Step 5: When your device has entered EDL mode, you can connect it to the PC and use tools like the MSM Download tool to flash firmware files to unbrick or restore stock ROM.
Xiaomi Redmi Note 11 Test Point By Using Adb Mode
Step 1: Install ADB & Fastboot driver on the PC and then turn on USB debugging on your Xiaomi Redmi Note 11.
Step 2: Then connect your device to a PC using a USB Driver.
Step 3: Next open a command window in PC, paste the following commands, and hit enter.
adb reboot edl
- If any pop-up appears on the phone screen, then allow ADB access.
Xiaomi Redmi Note 11 Test Point By using Fastboot mode
Step 1: First Download ADB and Fastboot Tool and extract it in your PC (C:/ Drive).
Step 2: Next boot your device into the bootloader.
Step 3: Now open the
- command window on your PC on the same folder extracted (ADB and Fastboot Tool)
- now enter the command
.\fastboot oem edl
Conclusion:
These are ways you can use to boot your Xiaomi Redmi Note 11 into Test Point or EDL Mode. This method can help you to wake a dead device. You should also bear in mind that although fishing any Xiaomi device is the same method, booting the Xiaomi phone into EDL mode may vary depending on the model or version. However, with the test point method, you should be able to boot any Xiaomi device into EDL mode.
